Thursday, September 24, 2015

Thursday, 23July2015: Skyline to Horton Bay, Mayne Island, BC

Weather:  Initially overcast becoming sunny and warm.  Winds:  Var 0-15, mostly S.  Waves:  <1ft.

The beginning of our summer trip to Desolation Sound and our initial destination was going to be determined by the winds.  Could we go straight to Vancouver?  Could we make it to the Gulf Islands?  Or would we overnight somewhere in the San Juans?

1015 departure.
Motored out of the marina at and west through Burrows Channel raising the main heading into Rosario.  SW winds were up on the Rosario and we sailed for about 15min until the winds died east of Thatcher Pass.  Motored to the south end of Cypress Island where S winds picked up.  Made 6.5kts under the main and screacher to Lawrence Point on Orcas Island when the winds died.  Still thinking we might make Vancouver, we motored north along the east side of of The Sisters and Clark Island, checking out the mooring buoys on Clark.  There were several open buoys and Clark would have made a nice stop.  But, it was only early afternoon and stopping now seemed too soon.  However, looking north into the Georgia Strait, the seas were dead calm indicating it would be a very long motor to Vancouver.

We made a left turn then and continued to motor past the south side of Matia and Sucia Islands intending to go somewhere in the Gulf Islands.  The winds picked up briefly just west of Sucia and we sailed at 8.5kts directly towards Plumper Sound in the Gulf Islands.  Winds died and while still on a heading towards Plumper, motored past Waldron Island.  Winds again picked up while crossing Boundary Pass and we made 8.5kts decreasing to 6.5kts as we entered Plumper.

Winds continued to decrease and we motored past Port Browning on North Pender Island.  Once past Port Browning, winds again picked up and we made 7kts under the main only.  Called the CANPASS line and made an appointment for Horton Bay.   Past Lyall Harbour and Winter Cove, the winds died and we motored through Georgeson Passage between Lizard and Samuel Islands and into Horton Bay at 1745.

Why Horton Bay?  First, there is a CANPASS customs dock there.  Second, it was someplace new for us.  Third, looked like a nice place in the guide book though it warned of potential anchoring problems.

Ever notice how one is an expert at the end of a trip but manages to forget everything over the winter and is a complete novice the next year?  We got to the customs dock early and gooned the docking.  Not being used to docking with the amas out, I smacked into the dock, leaving a little paint on the starboard ama bow.  Second attempt was better, though still not pretty.  Once on the dock, ate dinner while waiting the required time for a customs official.  After the time expired, we went searching for an anchorage.

Attempted to anchor first in the west end of the bay.  The area is filled with private buoys.  Got the anchor down and set, but a comfortable scope was not possible without potentially drifting into another boat.  So we next tried a tiny cove to the left of the customs dock.  Very shallow and we were warned about drying flats.  Even though shallow, there was too much rode and we were too close to the customs dock.

Location number 3 was on the east side in the vicinity of Curlew Island.  There was one other boat over there so we thought it would be good.  However, there was a lot of current moving through there and I never felt the anchor was truly set.  Pulled it up and found a lot of kelp, but no mud.  Off to spot 4.

4th time is a charm?  4th spot was on the SE side of the bay, directly in front of a cottage, upsetting their dog, but not the owners.  The water was clear and we could see sand between bunches of kelp.  Chose a spot and dropped the anchor into a sand patch where is set right away!  It was now 1930ish and we were tired.  But apparently not the kids about 100yds away who were in the water splashing and laughing until well after dark.  Did I mention the water temp was 55F?  Personally, I won't get into water less than 66F and then reluctantly.  These kids were crazy!

Grabbing a bit of Pusser's with an ice cube, we sat down for a pleasant evening of R&R in a peaceful anchorage.

Sunday, September 6, 2015

Laundry



In my-not-so-humble opinion, laundromats suck.  Marina laundries even more.  Few and far between, they are a quality craps shoot.  Tending to be hot and steamy, they may or may not have fully functioning machines.  Even if the washers function, there are other probable problems like not getting all the soap out.  Then, what was left behind by the previous user?  For instance, boat waxing rags leaving all kinds of muck in the machine?  Dryers...well, they take forever.  Everything is also expensive.  Further, the facilities tend to be crowded...one is lucky if the crowd is friendly.

No sir, I don't like it and would rather spend time on the boat vice a marina laundry.

So, a search for an alternative was deduced, experimented with and the results are presented.

The basics:  Wash and dry.  There may be a few intermediate steps in the process; sort, load into water with cleaning agent, agitate, wring out cleaning water, load into rinse water, agitate, wring.  Most of these are normally done by automatic washing machines.  Hands on are only required for the sorting, initial loading and transfer to the dryer.  Lucky these are modern times and we are not living in grandma's era huh?  I promise I don't envy grandma and I am too lazy to do all she did.

First, an admittedly smart assed assumption:  Everyone is familiar with solar clothes dryers.  This is the clothes drying method used since ancient days where clothing is placed such that circulating air and the shining sun can dry them.  Modern versions generally include a stretched, horizontal line and the use of clothes pins to secure the clothing to the line.  Sail boaters know lifelines and sheets work well for this purpose.

How to do the wash?  I had stumbled across the Wonderwash a few years ago and thought to purchase one.  Reviews were good, but it is a one-use-product, only used to do laundry.  I don't like one-use-products aboard, especially fairly large (size of a small microwave) one-use-products.  There is just not enough space. 

So, alternatives were looked for.  The internet and youtube can provide a lot of information, some is quite entertaining and I came across this 'cheap and easy DIY washing machine'.  Now this could be done easily as both the bucket and holey bucket were already aboard!  The on board bucket, besides being a just a bucket, seconded as the bottom half for a 'Bucket Head' vacuum cleaner.  With a lid, the holey bucket, suspended into the water next to the boat, is a live seafood container also known as a 'crab condo'.

Instead of the drilled plunger for an agitator though, a Breathing Mobile Washer was purchased w/o a handle.  It is small enough to store very easily (inside a bucket).  The boat hook already aboard has a compatible screw-in portion and could double as a handle.

So, bucket and agitator:  Check.  How to get rid of the water (wring) efficiently?

It is important to effectively get rid of the wash cycle water prior to rinsing.  The more soapy water removed, the less rinse water required.  While the sit squish method in the video worked, my 220 pounds did not 'wring' the clothing well enough and they came out wet.  The spin method just took too long and was labor intensive.  Hand wringing is a viable option.  But unless the clothes-damaging, around-the-lifeline-stanchion method was used, the bare hand method is just not effective enough.

Then a buddy suggested a wringer, an actual hand crank, roller wringer like grandma used to use.  They are still available!  Several were looked at and the DynaJet BL-38 was selected because of its simplicity.  A couple Magma T10-380 grill mounts easily replaced the stock mounts to enable rail mounting.  Mounting and adjusting the wringing pressure will be dependant upon the model purchased and your personal preferences.

Bucket, agitator and wringer:  Check.  Cleaning agent....

Strider only holds 30 gallons total fresh water.  Tough to do laundry with so little.  The first thought was to use salt water for the wash (detergent) portion then rinse with fresh.  Via cruiser forums, this was a bad idea.  More fresh water would be used to rinse the salt out than if fresh was used in the first place.  It is critical to get the salt out!  Salt will attract water (hence rice in the salt shaker) and the clothing, or bed sheets, will always feel damp.  Other forums discussed how much soap to use etc.

Then a reference was found to use ammonia instead of detergent.  An ancient cleaning solution, the Romans actually collected urine to convert to ammonia for use in their laundries.  Now, before anyone says 'yuck' or 'smells bad' or 'are you nuts' or 'piss' - ask yourselves how did the Romans get their togas so white?  And they did not walk around smelling like urine (BO maybe, but not urine).

So ammonia has a strong smell.  Use it in a well ventilated area like the stern of the boat.  Further, it is an organic, completely natural, disinfecting cleaner and not a bleaching agent - it will not change the color of the clothes.  Last, and best of all, it evaporates.  That's right, evaporates.  Translation:  No Rinsing is Required.

How much:  3/4 cup clear ammonia to 2.5 gallons of water is a good baseline and was found to work very well.  Make sure to get clear ammonia and not sudsy ammonia.  Sudsy ammonia has a small amount of detergent...which will require rinsing.

Bucket, agitator, wringer, cleaning agent:  Check, check, check and check.

The rest is just technique.  2.5 gallons of water and 3/4 cup ammonia in a 5 gallon bucket is not a lot of water/space so small loads are required or the clothes will not get an adequate agitation.  Since the wash water/ammonia solution will be used over and over, sort the clothing into small loads from lightly soiled to most heavily soiled and this is the order of washing:  Lightly soiled to more heavily soiled.

Details:  A small amount of clothing was loaded and agitated for about 2 minutes.  A lid was put on the bucket to prevent ammonia evaporation and load left to soak.  After about 30 minutes, the load was again agitated for about 2 minutes.  The wash cycle was now complete!  The trick now was to conserve as much of the wash water as possible.  Items were removed one at a time and some water was hand wrung back into the bucket.  Then the item was put through the wringer.  Smaller items were folded a couple times to increase the wringing pressure.  Larger items, like towels and bed linens had to be folded to make them narrow enough to fit into the wringer aperture.  Each wrung item was then set aside for hanging.  After the entire load was wrung, the next load was placed in the bucket and agitated for 2 minutes.  While the new wash load was soaking for 30 minutes, the wrung load was hung to dry.

100% water recovery is not possible and if there are too many loads, the water level or load amount will have to be adjusted.  If the loads are really dirty, a fresh batch of water/ammonia may be required.  Your option of course.

All in all, each load required about 40 minutes from loading to hung for drying.  30 minutes was soaking time, essentially down time available for something else like relaxing or another boat chore.

In the end, the left over cleaning solution was often pretty dirty.  Most times, the dirty water was just poured over the side (organic, natural remember) via the cockpit drains to help keep them clean.  Relatively clean solution was used to clean the sinks, countertops, around the toilet etc.

The results were impressive.  My wife, a skeptic with a nose able to detect a mouse fart, was thoroughly amazed and loved the results.  Fresh, clean, crisp bed linens!  The boat buddies with us decided to try it and are now purchasing their own equipment.

Cost:
1 Home Depot buckets              ~$3.00 (free since it was already aboard)
1 Home Depot bucket lid          ~$1.00 (free since it was already aboard)
1 Whisper w/o handle               ~$14.00
1 DynaJet Wringer                    ~$140.00
2 Magma Grill Mounts             ~$50.00 ea
Ammonia                                  cheap

The only cost I don't like was for the grill mounts.  They work great...just hate the cost. 

The formula is simple:  2.5 gallons fresh water + 3/4 cup ammonia + agitator + wringer + clothes line + sunshine = fresh, clean, crisp clothing.

Saturday, July 11, 2015

Tuesday, 7July2015: Port Townsend to Skyline

Weather:  Overcast and cool.  Winds:  0.  Waves:  Flat

Awakened at 0515 by a neighboring engine.  Slack tide was right now.  Since I was now wide awake and the tides dictated leaving soon or have to wait until 1100, I got up, adjusted the waterstays after they had been stressed the day before and we were underway by 0630...a little behind the tides/currents.

Initially, caught a nice eddy pushing us north towards Point Wilson at 6kts.  At Point Wilson, encountered rips.  Fortunately, they were not the big washing machine kind and they just slowed us to 3kts.  Pushed through, angling towards Partridge Point on Whidbey Island.

Encountered more rips and oceanic swells off Partridge Point...along with harbor porpoises!  Made it through the rips and the northbound flood started pushing towards home.  By the entrance to Burrows Bay, we were making 6.5kts!  Encountered a strong cross current at the entrance to Skyline, requiring a large crab.

Went straight to the fuel dock, fueled and folded while Kelly walked the dogs.  Cracked the homecoming beer at 1200.

Overall, slow going.  21nm in 5.5hrs.  Tides have been 10ft or 2ft with the current, huge, full moon.  The morning one has been the big one.  Got lucky on last Thursday's trip and was able to ride well.  Not so lucky on this trip.

Monday, 6July2015: Gig Harbor to Port Townsend

Weather:  Sunny and warm turning overcast and cool.  Winds:  S 0-10 becoming N 10-15 gusts to 20.
Waves:  Flat becoming 1-2ft.

After adjusting the waterstays (becoming a theme) and clearing the boat, departed Gig Harbor around 0930 to catch the northbound ebb.  Motored out and briefly sailed under the genoa alone to the Colvos.  Motored to the north end of Vashon Island and was able to sail again under the genoa only. 

Intended to go to Bell Harbor Marina in downtown marina setting us up for an easy jaunt to Elliot Bay Marina to pick up a watermaker Tuesday morning.  Just east of Blake Island, called the retailer and found out the device had not been shipped and probably would not arrive until Wednesday or Thursday.  We decided to skip downtown and pressed towards home.  Wind died and we motored along, around 6kts with the current.

Arrived at Kingston around 1430 and since it was early, decided to press on, perhaps Port Townsend as there are not a lot of places to pull over between Kingston and Port T.  Vicinity of Point No Point, winds had picked up and we were working hard against the flood current.  Made 2.5kts around Point No Point.  Wind waves were starting to hit us making things more difficult.  Angled towards Foulweather Bluff at the entrance to the Hood Canal, unfurled the genoa, stabilizing Strider and motor sailed at 6.5kts!

Briefly furled the genoa and motored around Foulweather Bluff.  Once around continued the bash towards Oak Bay Park.  As we got protected by Indian Island, the wind calmed and we motored towards what we thought was the park.  Indeed, we had found the place, but the water was so full of algae and crud (technical term), we decided to press on, through the Port Townsend Canal, towards Fort Flagler Marine State Park.

Once into the bay, the wind and chop hit us again in the face.  Motoring around the Indian Island Naval Facility, we could see a couple of the park buoys were occupied, but more importantly, the wind seemed to be blowing straight into the anchorage.  Since the distance to Point Hudson Marina was roughly the same as to the park, we decided to go to Point Hudson where the wind was generally moderated.

Due to the rough waves outside, did not fold until inside the marina.  Got inside and the real difficulty began.  There were several open slips, including a perfect one where we would not have to fold.  All but one had 'reserved' signs.  Attempted to back into one with the wind blowing us off.  Gooned it and ended up on the neighboring boat fending off our boat.  Said the heck with it and made a smooth landing on the 'Do Not Moor Here' pump out station.  It was now 2000, a long day and WTF?

Tired, we took the dogs for a walk and treated ourselves to Elevated Ice Cream.  Hit the rack around 2130.

A long day.  Should probably just bit the bullet and anchored in Oak Bay.  Once back home, called Point Hudson and spoke with a nice lady.  I asked what is the policy regarding reserved signs:  Such as after 2000 they are no longer reserved?  She stated normally the reserved signs meant something, but not currently.  She was doing the normal work of 4 people and with the adjacent RV park, just could not get down to the docks to pull any signs.

I also got a bit frustrated with the boat owners in the marina.  Several stopped what they were doing and watched us fold and attempt to moor, but not came to help us get into the first slip.  Yes, an indictment.

Thursday, July 9, 2015

Sunday, 5July2015: Blake Island to Gig Harbor

Weather:  Sunny and warm to hot.  Wind:  N 5-10 gusts to 15.  Waves:  1ft.

Since the wind was northerly and we were headed south, rigged the spinnaker before departure.  Checked the waterstays and adjusted since the boat wakes had compressed the fibers - slackening them.  Departed around 1000 with a sailing start.  Started the engine just in case, but released off Freestyle and let the wind pushed us clear and aft.  Did a Y turn and popped the spinnaker, heading south at 5kts.  The wind died at the north end of the Colvos and I was nearly temped to start the engine, but saw a breeze building to the south.  Also, Freestyle had wind to the NW of us.  RT, also did a sailing start - said he was goaded into it!

So, waited a bit while Freestyle caught up and then the wind picked up and we were off at 6.5kts.  After having done a light wind gybe solo, I thought I could handle one with a stronger wind.  Completely gooned it and twisted the sail in the middle.  Socked it and completed the gybe.  During this time, Freestyle closed half the distance...it is a fast boat!  Strider gained some and then came time for another gybe...and once again, gooned it.  Socked it and completed the gybe.  During this 5 minutes of fiddling around, Freestyle closed half the distance once again.  Damn fast boat.  Did one other gybe but socked it first (maybe I can learn something).

Sailed to nearly the harbor entrance, socked the spinnaker and motored in.  Kelly did a fine job avoiding kayaks, powerboats, small sailboats and other hazards moving around the harbor.  We motored to the far end of the bay, just looking around while waiting for our floating dock to arrive.  Freestyle arrived and dropped their hook just off Arabela's Landing.  Fenders were already over the side and we motored right up, tied off and opened a beer...two of mine since RT had drank all his...seems I'm always bailing out my little brother.

Enjoyed the busy Gig Harbor boat show:  Near collisions, big boats attempting to get into a slip, clueless kayaks and the occasional dinkus making wakus in the no wake zone and then making dumb ass excuses.  Watched the kids jump into the water once gain, at least this time it was 63 degrees.  Entertaining!

A pleasant evening eating mozzarella a caprese and left over chicken:  Perfect for the hot day!  The wind scoop was great at keeping the boat cool.  Slept well!

2-5July2015, Blake Island

Weather:  Sunny and hot!  Wind:  Calm to N@10-15.  Waves:  Flat except for wakes.

Anchored on the east side of Blake Island State Park for the 4th of July holiday.  From the east side, we had a tremendous view of Vashon Island to the south, and from Tacoma all the way north of Seattle.  Downtown Seattle and the Space Needle were clearly visible.  Impressive view and a great place to watch fireworks without the boom and bang to scare the dogs.

Thursday evening, after tying to a mooring buoy and walking the dogs ashore, taking care to avoid the abundant deer and raccoons, we settled into a nice, quiet sleep.  Early Friday morning, the dogs got us up and we took them ashore for their morning constitutions, once again, avoiding the deer and raccoons.  The dogs would have loved to chase the critters.  The deer would have outrun them and we probably would have lost our little girl in the woods since she does not know when to call it quits and come back.  Though the dogs think they are tough, the raccoons would have torn them to shreds.  Still, once sighted, the dogs would set off a caterwaul to wake the dead.  We tried to keep them quiet and let the campers sleep.

The island had more tent campers than we had seen before, but it was only the beginning.  By Saturday night, the NE corner of the island was nearly packed.  One of the park employees stated there was even a special ferry coming out, depositing more people just for the fireworks.

After breakfast, while still calm, I adjusted the waterstays.  Later, after other boats were moving about, Kelly hoisted me up the mast to retrieve the errant spinnaker halyard.  It was not as easy as I thought it would be.  The passing boat's wakes made life up the mast difficult.  At one point, I could see a set of big ones coming and I called for Kelly to hurry up about 3 more feet so I could stand on the spreaders and hold on.  But, got the halyard down!

RT, MM and Em arrived aboard Freestyle about 1130 Friday having rode the tide from Gig Harbor.  They tied off of Strider and then, since Freestyle weighs 27,000 pounds and Strider only 5,100 pounds, the mooring buoy was transferred to Freestyle.

Spent the next couple days comparing notes, telling lies er embellishing stories, watching Em and her friend Andrew jump into the 55 degree water (kids are insane), watching RT deplete his beer store.  Found a way to turn a hanging chair and a hammock into wind scoops.  Played with white tarps as sunshades...if Washington state can have blue tarp campers then it can have white tarp sailors!  The combination aft tarp and wind scoop kept Strider very comfortable.  Saturday, Em and Andrew fished in earnest and caught enough rock sole, augmented by 5 rock crab, to make a meal!

Saturday evening...great place to watch the fireworks.  The view, as mentioned above, was panoramic.  Once the sun was down and dusk nearly over, the fireworks began and did not really end...though most were over by 2300.  The display from the Federal Way/SeaTac area was consistent and long term leading us to believe we were seeing individual and not city fireworks.  Tacoma's was probably the longest large display and was quite lovely.  Seattle's, while spectacular, was very short.

Thursday, 2July2015, Skyline to Blake Island

Weather:  Sunny and warm!  Winds:  N 0-10  Waves:  <1ft

Moved aboard Wednesday night to get an early start to catch the tide on Thursday.

Thursday morning, moored for 30 minutes at the fuel dock to check the waterstay tension.  Adjusted them and we motored out around 0830.  Hooked a right into the Burrows Channel taking advantage of the westbound ebb.  Turned south in Rosario and the southbound ebb bumped us up to 7kts!  Wind picked up some and the main and genoa were set.  Wind died after an hour and we were back to motoring.

Hugged Partridge Point on Whidbey Island at the eastern entrance to the San Juan Strait to avoid the normal rips at Point Wilson.  Entered Admiralty Inlet with a slight ebb slowing us to 4kts.  We were off Port Townsend at slack.  Soon, a strong southbound flood had us moving fast again.

North wind started to pick up around 1300 and I thought to take advantage and raise the spinnaker.  Nearly to the top, the pelican hook lanyard caught on something up high on the genoa furler and the spinnaker dropped to the deck with a bang.  Fortunately, most of the spinnaker was on the deck and only about 15ft was in the water.  Pulled it out and set it on the nets.  Problem now was the the spinnaker halyard was up the mast and impeded the unfurling of the genoa.  I thought to lower the main and use the main halyard to go up and get it.  Kelly talked me out of it.  Frustrating to see the sailboats actually sailing and we were motoring.  Found a solution by furling and unfurling the genoa, each time slightly getting more slack in the spinnaker halyard.  Finally, the halyard dropped free of the furler and we were able to use the genoa!  The halyard though, was still at the top of the mast....

Sailed for about 2hrs, gybing back and forth under the main and genoa, staying in the southbound current, making 6.5kts.  Winds died off Kingston and we were back to motoring.  Arrived Blake Island State Park east side mooring buoys around 1900.  2 of 5 buoys were available and we took the middle one, the one closest to shore.

62 miles in 10 hours.  Not too bad.  Liked to have done it sailing, but after the spinnaker halyard goat rope, Strider was limited to the heavier weight sails, just not practical for the light winds.

We encountered several large ships, including a US Navy Arleigh Burke class destroyer USS Momsen DDG-92 and several other powerboats creating large wakes.  These wakes caused concern as the waterstays were stressed and slackened, still 'stretching'.  The material is not really stretching, but being pulled into position, kind of like getting the air out.  Still, there was no unexposed place to pull over and tighten them.  So, the hinges, particularly the port side, took the brunt of the forces.  Waterstay tension will need to be monitored and adjusted for quite some time.